We offer Duravent pellet stove piping because of their durability, safety, and design.
All components that come into contact with flue gases are built with an inner wall of corrosion-resistant super ferritic metal. It is engineered with features for a durable, safe, and aesthetically pleasing venting system. As a result of cutting-edge manufacturing processes and commitment to innovation, It is uncompromised in attention to detail and performance. This perfect fit and finish are made possible with a laser-welded inner and outer wall.
It is now UL listed for 1" clearance to combustibles in the USA and in Canada. Its double-wall, air-insulated design offers superior performance. Seams are factory-sealed on all elbows, tees, and fittings. Since the introduction of pellet stoves in the 1980s, We are recognized as the industry leader in venting systems for pellet stoves. Today, approximately 3 of every 4 pellet stoves in the US and Canada are vented with our pellet system.
3" Kits Include:
To have the piping inside your home you will need a 90 elbow. Kits with the 90-degree elbow include 3PVP-E90/3PVP-E90B.
4" Kits Include:
Note: The 45-degree swivel cap only comes in a galvanized color.
The only hiccup I encountered was the flue kit sections lengths. After putting it all together I found it was 1.5” short to obtaining the required 12” minimum distance from the outside house wall to flue cap discharge (turned down at 45 degrees) with the 2” space between flue pipe and combustibles (1/2” sheet rock) on interior wall. The tee with ash clean out, 3’ of pipe and the 90 elbow are located inside the house. It never specified if the 12” measurement is to the edge or the center of the flue cap discharge. If it’s the center it would have met the required minimal distance but I was able to find a longer 4” Duravent section locally. I highly recommend getting the kit. My temperature readings on and around the flue pipe are well below what I had anticipated. Plus the wall thimble is a MUST.
perfect size and seal great
- As it turns out, I did not require the Duravent 3 inch Pellet Stove Piping Kit. I used the piping that was already through the wall from the previous pellet stove (a Vogelzang from a previous owner; we never trusted the Vogelzang - it finally coaded out and became too unsafe to operate). So, now we have the piping kit as a backup. No problem.